Aspen FP2132 Hot Water Heavy Duty Pump

The Hot Water Heavy Duty pump is designed to handle 100°C water and with an outstanding 1800L/h water flow rate. No job is too big!

Aspen Hot Water Heavy Duty

This pump is designed to collect hot water from humidifier drain down cycles, and the normal condensate from any associated air conditioning or boiler systems.

The internal pre-wired safety float is a low current switch to stop the drain down cycle in the event of pump failure. The pump is operated via two internal float switches.


Key Features

  • High flow rate
  • Handles 100°C water
  • Non-return valve
  • Easy installation
Suitability
  • Up to 2400kW
  • Air handling units (AHUs); Humidifiers, Boilers; Refrigeration

SPECIFICATION

Max. flow:1,800 litres/hr @ 0m head
Tank capacity:5.0 litres
Power supply:230 V AC, 1.5 Amp, 50/60 Hz
Class:I appliance
Max. water temp.80°C
Outlets:15mm
IP protection:IP21
Max. recommended head:15m
Sound level:63 dB(A) @ 1m
Rated:Continuously
Max. AC unit output:2,400 kW
Inlets:2 x 40mm
Safety switch:3.0A normally closed

Write a review


You may also need