Ecor Pro DryBoat dehumidifiers

Purpose built boat dehumidifier. Unlike domestic dehumidifiers, these models are truly designed to run 24/7.  Very small and will extract water even down to -20°C.  

Perfect for any climate.  Salt resistant where others corrode.

This product is not yet available to buy online, to place an order please call 01823 665 660.

Ecor Pro DryBoat 8 and DryBoat 12 Dehumidifiers

Ideal for many applications for boats, yachts or any shipping but also where cleanliness is important and the DrBoat will need to be cleaned regularly with harsh chemicals or salt solution. Applications even for the food industry or food storage.

Protect from the harmful effects of excess moisture on boats, yachts etc. on electronics, furnishing & the very fabric of the hull itself.  This can literally rot the boat from the inside out. Stops the bad smells associated with damp making the cabin more pleasant to inhabit.

Perfect for drying out sails after a day sailing, drying clothes, ropes & equipment from the effects of salt spray. Drying or just maintaining cabin humidity level which prolongs the lifetime of items.

Both DryBoat units can be carried by one person and transported easily with the carrying handle.

No water container to empty. Instead, the water is expelled via a 41mm air duct to the outside (standard waste pipe diameter).

Desiccant Dehumidifier

Desiccant boat dehumidifier, compact in size with a stainless steel casing & carrying handle on four feet that double as securing fastenings. The feet allow the DryBoat units to be secured securely into a cupboard, under seats or used in a removable location to be able to take it home at the end of sailing.

Ecor Pro’s Unique DryBoat Low Temperature (+40 to -20°C) Desiccant Dehumidifier

Designed in the UK as a unit fit for professional purpose. The DryBoat is an Ecor Pro “3-hole“ system desiccant dehumidifier, built to the highest standard with solid construction. Input process air is dust filtered and dried. Input air can be ducted in with a 125mm duct (5″ inches). Wet exhaust air can be ducted out via a 41mm duct (standard waste pipe diameter).

The DryBoat desiccant dehumidifiers can equally be used for drying around the home. The turbofan allows a longer duct length of ducts up to 6 metres without greatly affecting performance.

SpecificationsDryBoat 8DryBoat 12
Typical extraction @35°C / 90% RH8 litres / day12 litres / day
Typical extraction @27°C / 60% RH6 litres / day10 litres / day
Air flow (process)90 m3 / hour130 m3 / hour
Air flow (regen)14 m3 / hour20 m3 / hour
Power supply230v 1ph 50Hz230v 1ph 50Hz
Current @27°C / 60% RH2.0 amps2.5 amps
Power @27°C / 60% RH0.45 kW0.55 kW
UK plug fuse rating13 amps13 amps
Operating temperature range-20 / +40°C-20 / +40°C
Noise level40 dB40 dB
IP ratingIP22IP22
Dimensions (L x D x H)200 x 200 x 200 mm200 x 300 x 200 mm
Weight net / gross4.5kg / 4.8kg5.7kg / 6.6kg
Max. process air inlet duct length1.0 m3.0 m
Max. process air outlet duct lengthNo flange/not applicable3.0 m
Max. wet air out duct length0.6 m1.0 m

Features Explained:

  • Whisper Quiet Fan – Very quiet fan makes this model ideal for small spaces where humans will be.
  • Highly Compact – Perhaps the smallest 8 and12 Litre dehumidifiers on the market.
  • Dust Filter – The DryBoat desiccant dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles from entering the unit and impeding performance.
  • Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or worn parts by a qualified person quickly. Prolonging the lifetime of the DryBoat dehumidifier.
  • On Four Feet – Anti-scratch plastic feet can cleverly be swivelled out to make four anchor points so that the DryBoat can be fastened with suitable screws or bolts (not provided) to walls or simply fastened down onto a surface.
  • Carrying Handle – Flat handle that can be extended to allow easy carrying in one hand
  • Humidistat – Built-in humidistat can
  • Remote Humidistat Option – A simple low voltage humidistat from the Ecor Pro range can be added by way of a simple plug-in low voltage jack plug.
  • Duct Air-In Option – The DryBoat 12 is fitted with a metal duct flange on the filter grill to allow for an external 125mm duct to draw in the air from a more remote point. Concentrate the dampest air into the unit to be dried if needed. The DryBoat 12 has an outlet spigot for ducting if required.
  • Exhaust Duct – Made for easy permanent installation by a plumber or Home DIY person using standard waste pipe 41mm diameter fittings.
  • Power Supply – 220V supply 50Hz that can be run off a 12VDC-220VAC converters (110V option)
  • Auto Reset – If there is an interruption to the power supply, the DryBoat will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
  • All Metal Construction – Metal construction inside & outside. Designed for longevity.
  • Tough Construction – The design is inherently strong and can cope with moving the unit on a frequent basis if needed. Far stranger than a typical domestic dehumidifier.
  • Long 5 Metre Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.
  • Easy Access to Key Parts – If there is a fault with the unit its easy for the professional to repair. fast access to the internal parts that can be maintained or replaced very easily.
  • IP 24 – Can even operate in more damp conditions.

DryBoat® and DryFan® are registered trademarks of Ecor Pro B.V.

Write a review

You may also need