Sauermann Si-60 Semi-submersible Pump

Sauermann Si-60 Semi-submersible Pump

The SI-60 is a piston pump with a built in tank (0.37 litre) suitable for airconditioning units up to 20 kW.

This pump is equipped with the Sauermann piston pump technology specifically designed for removing condensate from air conditioning systems.

Its attractive, ergonomic and compact design makes it easy to install, in any place.

Special detection - resistant to pollution

• IPX4 for a higher protection of mechanical and electrical parts
• Robust float, rotation is shaft out of water, higher resistance to pollution

EASY TO INSTALL

• Compact and attractive design
• The 3 inlet possibility allows the pump to be fed from top, side or in-pan
• Lockable plug-in power cable to avoid unintended disconnection

SAUERMANN INSIDE: NEW PISTON TECHNOLOGY

• Increased performance: Suitable for air-conditionning units up to 20 kW
• High Lift, up to 10m vertical and larger flow rate
• High resistance to pollution created by general environment. Capable of discharging small particles
• Proven Reliability
• Low sound level

ENERGY SAVING

• Improved performance and high flow rate reduce operation time and energy consumption.

THE KIT CONTAINS

• Piston pump
• An integrated float detection unit
• 1.5 m lockable plug-in power cable: 2 power wires, 2 safety switch wires
• Installation kit:
•  - Inlet rubber adapter Ø int. 15-20-24-32-40 mm
•  - Rubber elbow 90° Ø int.15 x L 60mm
•  - Plastic elbow 90°for tubing Ø int. 6mm
•  - 1 tie-wrap, 2.5 x 100 mm

SPECIFICATION

Max. flow:	20 litres/hr @ 0m head
Tank capacity:	0.37 litres
Power supply:	230 V AC, 14 Watt, 50/60 Hz
Class:	II appliance (double insulated)
Max. water temp.	not specified
Outlets:	6mm
IP protection:	IPX4
Max. recommended head:	10m
Sound level:	38 dB(A) @ 1m
Rated:	Continuous
Max. AC unit output:	20 kW
Inlets:	adapter 15-20-24-32-40mm
Safety switch:	8.0A normally closed