Sauermann PE 5000 Peristaltic Condensate Pump

This peristaltic pump is controlled by two temperature probes. When the temperature difference between the probes reaches 6°C, the pump runs. It stops three minutes after the temperature difference is fallen below 6°C.

This pump must not be used to continuously run.​

This product is not yet available to buy online, to place an order please call 01823 665 660.


Sauermann PE 5000 Peristaltic Condensate Pump

This peristaltic pump is controlled by two temperature probes. When the temperature difference between the probes reaches 6°C, the pump runs. It stops three minutes after the temperature difference is fallen below 6°C.

Please note: these pumps are not designed to operate continuously.


HIGH PERFORMANCE
  • High discharge head up to 12m
  • Low noise level ≤ 30 dBA at 1m
EASY TO INSTALL
  • Compact design IP65 protection allows installation without ventilation 
EASY AND QUICK MAINTENANCE
  • Its replaceable head and easy access tube reduce maintenance costs 
THE KIT CONTAINS:
  • Peristaltic pump PE 5000
  • Cable: 1.7 m, 2-core power supply
  • Two temperature probes with 3.5m cable: Red for ambient air. Blue for fresh air
  • Easy "1 screw" sliding plastic bracket
  • Ø 15 mm to Ø 6 mm adaptor + pale yellow rubber (Ø 15 x 35mm) - (PE5003)

Write a review


You may also need