Aspen Standard FP2081 Peristaltic Condensate Pump

Operated by an air conditioning cooling signal, the Standard peristaltic sets the standard for reliability.

The remote install options mean minimum future maintenance disruption.

Aspen Standard Peristaltic Pump

Simply connect the Standard peristaltic pump to the appropriate drip tray (using the vinyl tube supplied), mains supply and control link to the air-conditioning units cooling signal. The pump can be mounted remotely as it is self-priming to a height of 3 metres and will pump 6.25 litres per hour against a head of 12 metres.

Key Features

  • AC cooling signal operated
  • Remote install possible
  • Pumps contaminated water
  • Can run dry
Suitability
  • Up to 8.5kW / 29,000Btu/h
  • High wall split systems; Ducted units; Floor-standing & Chassis units

The Standard pump is designed to run constantly while the air conditioning system is cooling.

This is achieved by linking the pump to the cooling signal. When the cooling switches off, a timer in the pump ensures that the drain tray is emptied before the pump switches off. The signal wire can be connected to the cooling signal and therefore on heating, the pump does not run.

The pump is a peristaltic rotary type - which means that it is quiet in operation, very reliable and will run dry without fear of damage or any embarrassing noise. It is not sensitive to waterborne contaminants as reciprocating pumps are, and there is no mechanical water sensor to fail.

It is designed to fit in ceiling voids and lift the condensate water from wall mounted machines where a gravity drain is too obtrusive. It can be used on cassettes fitted with an internal lift pump. The rollers act as check valves to stop condensate draining back into the drip tray.

The standard pump now has a new push in plug which makes installation and maintenance easier.

Write a review


You may also need