Friax EVX Wall Mount Wine Cellar Split System

The Friax SPC-EVX is a wall-mounted wine cellar split system, similar in appearance to the monobloc MPC range.

The indoor unit is designed to be sited inside the cellar, wall-mounted.

The EVX is not suitable for a location outside of the cellar. The KPG duct kit is not suitable for the EVX evaporator.

This product is not yet available to buy online, to place an order please call 01823 665 660.

The Friax SPC-EVX is a wall mounted wine cellar split system, similar to the monobloc MPC range. The indooor unit is designed to be sited inside the cellar, wall mounted. The EVX is not suitable for siting outside of the cellar.

Friax SPC-EVX systems are available in two sizes in both the Genesis and Vintage versions. All units have wireless controllers and the ability to connect to the Friax Wine Supervisor monitoring system.

Cooling capacity(W)7801,100
Heating capacity *(W)800800
Evaporator airflow(m3/hr)405510

* Heating and humidity only Vintage models

Friax EVX installation arrangement

Genesis Models:

  • Cooling only
  • Indoor units designed to be sited inside the wine cellar
  • Case constructed from black epoxy coated galvanised steel
  • Front panel bronze anodised aluminium
  • The condensate drain can either be connected to the front panel or under the unit adjacent to the wall.
  • Stainless steel Danfoss thermostatic expansion valve
  • CWR (cold water recycling) for humidity stabilisation
  • Indicator lights and alarms on displayed on the façade
  • Variable speed EC condenser fan motor
  • Nitrogen holding change
  • Both sizes use refrigerant R134a

Vintage Models:

  • All the features of the Genesis version above plus
  • Electric heating
  • Humidifier

Friax EVX evaporator dimensions

  • Air-cooled condensing unit (water-cooled WEVX is available - contact us for more information)
  • Galvanized sheet construction with Plug & Lock wall support and anti-vibration mounts
  • RAL 7035 epoxy painted body for outdoor installation
  • Liquid line drier and sightglass
  • Pressure safety switches HP/LP
  • Condensing pressure control by variable speed EC fan motor
  • Compressor crankcase heater
  • Suction and liquid connections fitted with Schrader fittings
  • Precharged with refrigerant R134A

For more information on any of the above please contact us on 01823 665 660.

Write a review

You may also need