Marstair CD3 Close Control System

The Marstair CD3 close-control systems are available as DX split systems to suit R513A and R407C (for service replacement), or chilled water applications.

CD3 systems are designed to give the specifier maximum flexibility, the engineer easy access for installation and maintenance and the end user ease of operation.

Description

Marstair CD3 Close Control Systems

Marstair offers an extensive range of CD3 small close control systems (6.6-20kW). These flexible systems are extensively used for storage room applications requiring close temperature and humidity control. CD3 systems are manufactured to suit your specifications with up-flow or down-flow configuration and single or twin-circuit indoor units, which can be matched to Marstair condensing units.

The Marstair CD3 range has been developed to provide precise temperature and humidity control in mission-critical environments where reliability and operational stability are essential.

CD3 systems offer maximum flexibility for consultants, engineers and end users, with configurable airflow arrangements and close control performance designed for critical applications.

Available in three cabinet sizes, CD3s are manufactured with a powder-painted steel construction and an easy-clean corrosion-resistant drain tray, washable filter, de-ice thermostat, and a totally enclosed electrics panel. A range of airflow configurations are possible — see the brochure download tab above.

Specification

  • DX split systems to suit R513A and R407C (for service replacement) can be matched with CKC(+) or DCU(+) ducted condensing units
  • Chiller water systems with LPHW capability
  • Microprocessor controls: Control tolerance +/- 1°C
  • Upflow or Downflow
  • Choice of grille or ducted discharge
  • Choice of different return air options
  • Washable filter
  • Class ‘O’ thermal and acoustic insulation
  • Direct drive, double inlet forward curved centrifugal (150 Pa resistance)
  • Single or Twin circuit coil option (DX only)
  • Fitted with thermostatic expansion valve (TEV)
  • Electronically controlled fan speeds – EC motor (0-10V control)
  • Matching fully dressed CKC air-cooled condensing units or ducted DCU+ condensing units.
  • 3-phase – 400 Volts 50Hz supply voltage (some 1ph options available)

Options

  • Humidification/Dehumidification with electronic control +/- 5% RH *
  • 1 or 2-stage electric heating *
  • Four pole mains isolator *
  • Alarms: temperature/humidity out of limits, fan fail, CU fail, dirty filter indication, fan failure *
  • Humidity alarm (standard with humidifier option)
  • Water Spillage Alarm (when the pump option is fitted)
  • Common Alarm (volt-free relay)
  • BACnet interface
  • Master/Slave
  • Duty/Share –  Auto change-over on time or alarm
  • Condensate pump (5-metre head with high-level alarm)
  • Fresh air spigot, fan and filter
  • Floor Plinth (recommended for floor-mounted applications)
  • High-efficiency filters (BSEN779F7)
  • Disposable filters (BSEN779G3)
  • Top ducting spigot
  • Double deflection grille
  • Sound Attenuator section
  • De-ice thermostat *
  • Choice of valve options for chilled water units

* Standard on Packaged Units

Brand

Marstair

Marstair has been producing equipment in Yorkshire for nearly 50 years and is one of the leading manufacturers within the air conditioning and refrigeration sectors in the UK.

Its wealth of experience in heat transfer product design, along with thermal and fluid dynamics, has enabled it to design innovative, cost-effective and energy-efficient solutions for a wide range of applications.

Marstair continues to innovate with its recently introduced CXL/CKL range of R32 cellar coolers, which combines the same high specification as its successful CXE/CKC range with the environmental benefits of R32 (GWP 667 compared to 2,088 for R410A).

Downloads

Marstair CD3 close control systems brochure

Marstair CD3 R407C DX close control manual

Marstair CD3 R513A DX close control manual

Marstair CD3 chilled-water close control manual

Related Items

Case Studies

These are just some
of our recent projects

Accreditations

We are proud members of these organisations

Accreditation-Logo-1
HEVAC-Logo+Strapline 2024
FETA Humidity Control Group logo
Accreditation-Logo-4
Accreditation-Logo-5
Accreditation-Logo-6