Click on the image for a larger version.

Product Reference: STANDARD

You can also...

Print Page Send to a Friend Enquire about this Product Write a Review Share This

Simply connect the Standard peristaltic pump to the appropriate drip tray (using the vinyl tube supplied), mains supply and control link to the air-conditioning units cooling signal. The pump can be mounted remotely as it is self-priming to a height of 3 metres (9.8ft) and will pump 6.25 litres (1.65 US gallons) of water per hour against a head of 12 metres (40ft).

The Standard pump is designed to run constantly while the air conditioning system is cooling.

This is achieved by linking the pump to the cooling signal. When the cooling switches off, a timer in the pump ensures that the drain tray is emptied before the pump switches off. The signal wire can be connected to the cooling signal and therefore on heating, the pump does not run.

The pump is a peristaltic rotary type - which means that it is quiet in operation, very reliable and will run dry without fear of damage or any embarrassing noise. It is not sensitive to water borne contaminants as reciprocating pumps are, and there is no mechanical water sensor to fail!

It is designed to fit in ceiling voids and lift the condensate water from wall mounted machines where a gravity drain is too obtrusive. It can be used on cassettes fitted with an internal lift pump. The rollers act as check valves to stop condensate draining back into the drip tray.

The standard pump now has a new push in plug which makes installation and maintenance easier.